Select Bikes Ltd - Echo 20" freehub (116mm axle)

Select Bikes Ltd - Echo 20" freehub (116mm axle)

GBP EUR USD Welcome Guest [Login | Register]
Search for:
Shop by Category
Location: /Hubs 20"

Echo 20" freehub (116mm axle)

Echo 20" freehub (116mm axle) Echo 20" freehub (116mm axle)

Product Information
-  50% OFF
-  For 20" mod bikes or 116mm dropout stock 26" bikes.
-  Available in red, blue, green, gold, silver and black.
-  48 engagement points giving a fast engagement for more control and responce, this is know to improve your riding, you will notice the difference.
-  4 pawls, cnc machined steel, specially tested and hardened for the purpose .
-  24 tooth ratchet, this allows the teeth to be deep so it is much harder for the pawls to slip out.
-  Splines on the hub allow for a splined cog to be fitted and tightened with a threaded locking which is easily unscrewed using a spanner (replaces screw on method)
-  A slot in the non-drive side axle end stops the axle from annoyingly spinning when tightening the axle bolts.
-  116mm axle spacing which includes the snail cams on the axle so the snail cams won't budge when tight.
-  5 large fully sealed cartridge bearings to keep out water and grime for long lasting smooth bearings.
-  The 5 bearings also gives a lot more support to the freehub and axle eliminating flex and helping to reduce slipping and wear.
-  Extra wide flange spacing which increases the strength of the wheel build.
-  7075 CNC machined 17mm hollow axle.
-  6061 T6 cnc machined hub shell.
-  Includes stainless steel allen key low profile bolts and washers, this keeps them out the way from damage as much as possible.
-  Snail cams included.
-  Includes 12t cog (or change to a 13t, 14t, 15t or 16t cog FOR FREE, see below for details).
-  32h only.
-  320g including the bolts and snail cams.

NOTE:

This hub includes a 12t cnc chrome sprocket as standard.

If you don't wish to run the 12t cog, it is no problem for us to replace the 12t cog with either a 13T, 14T, 15T or 16T for you at no extra cost, whichever you prefare, simply select the colour you wish from the drop down menu below and then select the teeth number you require.

All the cogs for this hub are also available from the chainrings/cogs section if you require any seperately.

Price: €62.46 €59.33


Product Options:
Colour
Teeth

Product Code: ECHN28
Quantity: Add to Basket
Shopping Basket
Your basket is empty.
0Items in cart:
€0.00Total:
Mailing List
Subscribe to our mailing list below:
Email:
Featured Product
Popular Products
Latest Products
Statistics:  Products: 162, Categories: 40, Prices: Euro  © SelectBikes.com  All Rights Reserved. Terms & Conditions. Privacy Policy

Âö‡FÖÃà